Sierra 1500 2WD V8-5.3L VIN Z Flex Fuel (2006)
10. Install the range selector cable end (2) to the transmission range selector lever ball stud (1).
11. Lower the vehicle.
12. Install the range selector cable to the support.
Important: Avoid unnecessary twisting/bending of the range selector cable when removing the cable from the support.
13. Install the bolt securing the cable support to the brace.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
14. Install the cable to the steering column bracket.
15. Install the cable end to the steering column ball stud.