Sierra 1500 2WD V8-6.0L (2007)
Steering Damper: Service and Repair
Steering Linkage Shock Absorber Replacement
Tools Required
J 24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
1. Remove the engine shield, if equipped.
Important: Discard the steering linkage shock absorber nut.
2. Remove the steering linkage shock absorber nut (1) from the steering linkage shock absorber (2).
3. Remove the steering linkage shock absorber from the relay rod using puller J 24319-B.