Sierra 1500 2WD V8-6.0L Hybrid (2010)
6. Remove all dirt and debris from the electronic brake control module (EBCM) and the brake pressure modulator valve (BPMV).
7. Disconnect the EBCM electrical connector.
8. Loosen, but do not remove, the EBCM bolts (1).
Note: Do not pry the EBCM from the BPMV. The EBCM must be pulled away from the BPMV evenly.
9. Using the loosened EBCM bolts as a guide, carefully pull the EBCM (1) evenly away from the BPMV to release the electrical connectors.