Sierra 1500 2WD V8-6.0L VIN U (2004)
4. Tighten the bolt on J 29714-A in order to compress the servo cover.
5. Install the servo cover ring.
6. Remove the J 29714-A.
7. Notice:
Refer to Fastener Notice in Service Precautions.
Install the oil pan bolt.
^
Tighten the bolt to 11 Nm (97 inch lbs.).
8. Install the heat shield and bolts.
^
Tighten the bolts to 17 Nm (13 ft. lbs.).
9. Install the exhaust pipe.
10. Fill the transmission to the proper level with DEXRON® III transmission fluid.