gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Brakes - Low Speed ABS Activation/No DTC's Set|Page 12269 > < Brakes - Low Speed ABS Activation/No DTC's Set|Page 12267
Page 3
background image

5. Notice:  Refer to Fastener Notice in Service Precautions.

Install the WSS mounting bolt.
Tighten the WSS mounting bolt to 18 Nm (13 ft. lbs.).

6. Install the WSS cable mounting clip to the knuckle.
7. Install the WSS cable mounting clip to the upper control arm.
8. Install the WSS cable mounting clip to the frame attachment point.
9. Connect the WSS cable electrical connector.

Brakes - Low Speed ABS Activation/No DTC's Set|Page 12269 > < Brakes - Low Speed ABS Activation/No DTC's Set|Page 12267