Sierra 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
Seat Cushion Frame Replacement - Front
Seat Cushion Frame Replacement - Front
Removal Procedure
1. Remove the seat trim panel.
2. Remove the seat cushion trim cover and pad.
3. Remove the following components from the seat cushion frame:
*
The frame springs (1)
*
The frame suspension (2)
*
The plastic retainers (3)
4. Remove the seat cushion frame from the vehicle.
Installation Procedure
1. Install the following components to the seat cushion frame:
*
The plastic retainers (3)
*
The frame suspension (2)
*
The frame springs (1)
2. Install the seat cushion trim cover and pad.
3. Install the seat trim panel.
4. Re-zero the inflatable restraint passenger presence system. Refer to Passenger Presence System Programming and Setup in Restraint Systems.
Seat Cushion Frame Replacement - Rear
Seat Cushion Frame Replacement - Rear
Removal Procedure