Sierra 1500 4WD V8-6.0L VIN U (2006)
1. Connect the electrical connector.
2. Ensure the bottom of the molding is seated in the slots on the I/P.
3. Align the molding retainers to the slots.
4. Press the moldings straight in till fully seated.
Trim Panel Replacement - Hinge Pillar
TRIM PANEL REPLACEMENT - HINGE PILLAR
REMOVAL PROCEDURE
1. Remove the door-sill plate.
2. Remove the hinge pillar panel.
INSTALLATION PROCEDURE
1. Install the hinge pillar panel.
2. Install the door-sill plate.
Trim Panel Replacement - Rear Quarter (Crew Cab)
TRIM PANEL REPLACEMENT - REAR QUARTER (CREW CAB)
REMOVAL PROCEDURE
1. Remove the coat hook, if required.
2. Remove the rear window lower molding.