Sierra 1500 4WD V8-6.0L VIN U (2006)
![background image](/gmc/sierra_1500_4wd/v8-6.0l_vin_u/Page-3357005.png)
6. Install the armrest screw.
Tighten the armrest screw to 2 N.m (18 lb in).
7. Install the rear window molding.
8. Install the rear seat if necessary.
Trim Panel Replacement - Rear Quarter (Regular Cab)
TRIM PANEL REPLACEMENT - REAR QUARTER (REGULAR CAB)
REMOVAL PROCEDURE
1. Remove the coat hook.
2. Remove the jack and tool stowage.
3. Remove the rear window lower molding.
4. Remove the quarter panel trim screws.
5. Remove the rear screw from the sill trim plate.
6. Remove the quarter panel.
INSTALLATION PROCEDURE
1. Install the quarter panel.
2. Install the quarter panel trim screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
3. Install the rear screw into the sill trim plate.
4. Install the rear window lower molding.
5. Install the jack and tool stowage.
6. Install the coat hook.