Sierra 1500 4WD V8-6.0L VIN U (2006)
12. Remove the inner hub bearing.
13. Remove the inner hub bearing cup using a brass drift and a hammer.
14. Remove the retaining ring from the wheel hub.
15. Remove the outer hub bearing and bearing cup using the J 24426 (2) and the J 8092 (1).
Installation Procedure
1. Lubricate the following with a light coat of high melting point EP bearing lubricant:
^
The outer wheel bearing
^
The inner wheel bearing
^
The outer wheel bearing cup
^
The inner wheel bearing cup
^
The axle housing