Sierra 1500 4WD V8-6.0L VIN U (2006)
![background image](/gmc/sierra_1500_4wd/v8-6.0l_vin_u/Page-2103004.png)
4. Inspect the rear output shaft bushing for scoring or wear.
5. Remove the rear output shaft bushing if required, using the J 45380.
^
Install the finger section of the J 45380 into the front of the bushing.
^
Install the tube and forcing screw to the finger section. Ensure the forcing screw is backed out.
^
Using a wrench on the forcing screw, remove the rear output shaft bushing.
Installation Procedure
1. Using the J 45380, install a NEW rear output shaft bushing.
^
Install the bushing or the finger section of the J 45380.
^
Install the finger section to the main body of the J 45380.
^
Position the bushing and tool to the case.
^
Using a hammer and the J 45380, install the bushing.