Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
Notice: Ensure proper torquing of the fuel injector line. An under-torqued fuel injector line will not seal properly and an over-torqued fuel injector
line may damage the fuel injector fitting. An improperly sealed or damaged fuel injector line or fuel injector fitting will cause a fuel leak.
5. Install the fuel injector pipes.
Tighten the pipes to 41 N.m (30 lb ft).
6. Position engine harness brackets.
7. Install the engine harness bracket bolt.
Tighten the bolt to 21 N.m (15 lb ft).
8. Install the PCV hose/pipe.