Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
Tighten the bolts to 10 N.m (89 lb in).
11. Install a NEW O-ring to the CKP sensor.
12. Lubricate the O-ring with clean engine oil.
13. Install the CKP sensor and bolt.
Tighten the bolt to 10 N.m (89 lb in).
14. Connect the CKP sensor electrical connector.
15. Install the right wheelhouse panel.
16. Install the crankshaft front oil seal.
17. Install the water pump.
18. Connect the negative battery cable.