Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
Installation Procedure
1. Install the power steering gear outlet hose (1) to the vehicle.
2. Connect the power steering gear outlet hose (2) to the steering gear (1).
Notice: Refer to Fastener Notice.
3. Compress the power steering gear outlet hose clamp (2).
4. Connect the power steering gear outlet hose (1) to the power steering pump assembly (3).
Tighten the fitting to 32 N.m (24 lb ft).
5. Clean any excessive power steering fluid from the vehicle and remove the drain pans.
6. Fill and bleed the power steering system.