Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
5. Position the EGR valve cooler coolant hose, and install the hose to the EGR valve cooler.
6. Position the EGR valve cooler coolant hose clamp (1).
7. Install the EGR valve cooler coolant hose clamp nut (2).
Tighten the nut to 24 N.m (18 lb ft).
8. Position the heater inlet hose and install the hose to the EGR valve cooler.
9. Position the heater inlet hose clamp (1) at the EGR valve cooler.
10. Install the intake manifold tube.
11. Install the air intake pipe.
12. Install the charger air outlet pipe.
13. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Vac-N-Fill).