Sierra 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Intake Manifold: Service and Repair
Intake Manifold Cover Replacement
Intake Manifold Cover Replacement
Removal Procedure
1. Loosen the intake manifold cover clamp (1) at the resonator.
2. Loosen the intake manifold cover bolt (2).
3. Remove the intake manifold cover.
Installation Procedure
1. Install the intake manifold cover.
2. Tighten the intake manifold cover bolt (2) until snug.
3. Notice: Refer to Fastener Notice in Service Precautions.