Sierra 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
9. Loosen the valve adjusting screws.
10. Insert a feeler gage between the tip of the rocker arm and the valve bridge.
11. Adjust the valve clearance to 0.3 mm (0.0112 inch). Refer to Valve Clearance Adjustment Specifications to determine which valves can be
adjusted when the engine is at TDC.
12. Tighten the lock nut.
Tighten nut to 22 Nm (16 ft. lbs.).
13. Install the upper valve rocker arm covers.
14. Install the fan clutch.