Sierra 2500 Denali 2WD V8-6.0L (2011)
13. Assemble the brake hose fitting bolt (1) and 2 new brake hose fitting gaskets (2) to the brake hose fitting (3).
14. Install the brake hose assembly to the caliper inlet and tighten the brake hose fitting bolt to 40 Nm (30 lb ft).
15. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair)Hydraulic Brake System Bleeding (Two-mode Hybrid) (See: Brake
Bleeding/Service and Repair).
16. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
Front Brake Caliper Hardware Replacement (JD9, JF3, JF7, JG4)
Front Brake Caliper Hardware Replacement (JD9, JF3, JF7, JG4)