Sierra 2500 Denali 2WD V8-6.0L (2011)
![background image](/gmc/sierra_2500_denali_2wd/v8-6.0l/Page-1516034.png)
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
3. Drill a 3 mm (1/8 in) hole through the dimple in the right parking brake cable connector (1) where the front parking brake cable is connected.
4. Pull the parking brake equalizer forward and disconnect the right parking brake cable connector from the intermediate parking brake cable.
5. Compress the locking tabs on the right parking brake cable conduit (2) and remove the parking brake cable from the equalizer.
6. Pull the right parking brake cable (1) through the frame bracket and over the rear stabilizer bar link.