Sierra 2500 Denali 2WD V8-6.0L (2011)
![background image](/gmc/sierra_2500_denali_2wd/v8-6.0l/Page-237030.png)
2. Install the HO2S (3).
Tighten the sensor to 42 Nm (31 lb ft).
3. Install the HO2S electrical connector clip to the engine harness clip (6).
4. Connect the engine wiring harness electrical connector (4) to the HO2S electrical connector (3).
5. Install the CPA retainer (5).
6. Lower the vehicle.