Sierra 3500 2WD V8-6.0L VIN U (2004)
1. Locate the air flow direction arrow (2) on the MAF/IAT sensor.
2. Install the MAF/IAT sensor to the air cleaner assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Tighten the MAF/IAT clamp.
Tighten
Tighten the clamp to 7 N.m (62 lb in).
4. Connect the MAF/IAT sensor electrical connector (4).
5. Push in the gray CPA retainer.
6. Install the air cleaner outlet duct.