Sierra 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
6. Install the WSS cable mounting clip to the knuckle.
7. Install the WSS cable mounting clip to the upper control arm.
8. Install the WSS cable mounting clip to the frame attachment point.
9. Connect the WSS cable electrical connector.
10. Install the brake rotor (2) shown on the 1500 series. Refer to Brake Rotor Replacement - Front in Disc Brakes.
11. Install the tire and wheel.
12. Perform the Diagnostic System Check - ABS.
