gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Engine Controls - Revised DTC 0090 Diagnostics|Page 5429 > < Engine Controls - Revised DTC 0090 Diagnostics|Page 5427
Page 7
background image

5. Connect the fuel temperature sensor electrical connector.

6. Install the water outlet tube.
7. Connect the ECT sensor electrical connector.

8. Install the main connectors to the bracket.
9. Install the main engine harness electrical connector bolts.

Tighten
Tighten the bolts to 21 N.m (15 lb ft).

Engine Controls - Revised DTC 0090 Diagnostics|Page 5429 > < Engine Controls - Revised DTC 0090 Diagnostics|Page 5427