Sierra 3500 2WD V8-8.1L VIN G (2005)
Sun Shade: Service and Repair
SUNROOF SUNSHADE PANEL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the glass panel.
2. Remove the drain channel.
3. With the sunshade (1) in the closed position, push front (either side) sunshade spring (glider) (2) inward and release glider from the track.Gently
pull same corner of the sunshade outward and wiggle remaining gliders out of the track.
INSTALLATION PROCEDURE
1. Install sunshade (1) and place both gliders on one side into track. Now compress one of the other gliders (2) inward and slide into track.Repeat this
procedure for the last glider.
2. With the sunshade in half open position, install the drain channel.
3. Install the glass panel.