Sierra 3500 4WD V8-6.0L (2008)
Band Apply Servo: Service and Repair
2-4 Servo
Tools Required
J 29714-A Servo Cover Depressor
Removal Procedure
1. Remove the catalytic converter pipe. Refer to Catalytic Converter Replacement (4.3L) Catalytic Converter Replacement (4.8L, 5.3L, 6.0L, 6.2L)
Catalytic Converter Replacement (6.6L) .
2. Remove the heat shield bolts.
3. Remove the heat shield.
4. Support the transmission.
5. Remove the transmission crossmember. Refer to Transmission Support Crossmember Replacement (2WD 2500 HD/3500) Transmission Support
Crossmember Replacement (2WD 1500/2500) Transmission Support Crossmember Replacement (4WD 1500/2500) Transmission Support
Crossmember Replacement (4WD 2500 HD/3500) .
6. Lower the transmission with a suitable jack.
7. Remove the oil pan bolt below the servo.
8. Install the J 29714-A .
9. Tighten the bolt on J 29714-A in order to compress the servo cover.
10. Remove the servo cover ring.
11. Remove the J 29714-A .