Sierra 3500 4WD V8-6.0L (2008)
Rear Door Window Motor: Service and Repair
Rear Sliding Window Module Replacement
Rear Sliding Window Module Replacement
Removal Procedure
Important: The new rear sliding window motor/module is equipped with the bracket and relays.
1. Remove the rear sliding window lower garnish molding.
2. Cycle the rear sliding window to the fully closed position.
3. Remove the screw (1) from the rear sliding window regulator and cables (2).
4. Pull forward on the regulator and cables (2) to release it from the motor/module.
5. Remove the rear sliding window motor/module nuts (2).