Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Install the engine flywheel.
9. Install the lower oil pan.
10. If vehicle is a 4WD, install the front differential carrier.
11. If vehicle is a 2WD, Connect the relay rod to the pitman arm and idler arm.
12. Lower the vehicle.
13. Install the oil level indicator tube bolt to the fuel injection control module bracket.
Tighten the bolt to 21 Nm (15 ft. lbs.).
14. Install the oil level indicator.
15. Fill the engine with oil.