Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Important:
Apply lubricant to the insulators to aid in installation.
32.
Install the insulators to the frame hangers.
33.
Tighten the catalytic converter coupling nuts until snug.
34.
Once sung, tighten the catalytic converter coupling nuts.
Tighten
Tighten the nuts to 45 Nm (33 lb-ft.).
35.
Raise the rear axle using the adjustable jack stands.
36.
Install the rear shock absorbers lower bolts and nuts.
Tighten
Tighten the bolts to 95 N.m (70 lb ft).
37.
Install the rear axle vent hose to the rear axle.