Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
23.
Install the suction hose nut to the accumulator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
24.
Connect the electrical connector to the A/C low pressure switch.
25.
Install the new suction hose to the compressor.
26.
Install the suction hose mounting bolt to the A/C compressor.
Tighten
Tighten the bolt to 16 N.m (12 lb ft).
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer