Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Wheel Bearing: Adjustments
Rear Wheel Bearing Adjustment
(With Full Floating 10.5" or 11.5" Ring Gear)
IMPORTANT:
Ensure the brakes are fully released and do not drag.
^
Pull or push the tire at the top back and forth in order to test the wheel bearing play.
^
Use a pry bar under the tire as an alternative.
^
If the wheel bearing adjustment is correct, the movement will be barely noticeable.
^
If the movement is excessive, adjust the bearings.
Adjustment Procedure Tools Required J 2222-C Wheel Bearing Nut Wrench
1. Raise the vehicle.
2. Remove the axle shaft.
3. Remove the hub adjuster nut retaining ring.
4. Remove the adjuster nut lock key.