Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
5. Position the fuel hose clamps (1) at the return/feed line as required.
6. Install the air intake tube.
7. Install the water outlet.
8. Prime the fuel system. Refer to Fuel System Priming.
9. Start the engine. If the engine stalls, repeat the above step.
10. Once the engine starts, inspect for fuel leaks.
Fuel Hose Replacement - Fuel Filter/Heater to Fuel Feed Block
FUEL HOSE REPLACEMENT - FUEL FILTER/HEATER ELEMENT HOUSING TO FUEL FEED BLOCK
REMOVAL PROCEDURE
1. Reposition the hose clamps at the fuel filter and the return line.
2. Remove the fuel hose (1) from the fuel filter housing and the return line.
INSTALLATION PROCEDURE