Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Front Steering Knuckle: Service and Repair
Rear
Steering Knuckle Replacement
^
Tools required
-
J 24319-B Universal Steering Linkage Puller
Removal Procedure
1. Notice:
Refer vehicle Lifting.
Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the wheel hub and bearing.
4. Remove the upper ball joint.
5. Remove the lower ball joint.
6. Remove the outer tie rod retaining nut and bracket (2).
7. Disconnect the outer tie rod from the steering knuckle using the J 24319-B (1).
8. Remove the park brake cable retaining bolt (3) from the steering knuckle.