Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
9. Install the nut (2) and washer (3) retaining the wheel drive shaft assembly to the wheel hub and bearing.
^
Tighten the nut to 240 Nm (177 ft. lbs.).
10. Install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle.
^
Tighten the brake hose clip bolt to 12 Nm (106 inch lbs.).
11. Install the rotor. Refer to Brake Rotor Replacement - Front in Disc Brakes.
12. Install the tire and wheel.
13. Lower the vehicle.
