Sierra 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
![background image](/gmc/sierra_3500_4wd/v8-6.6l_dsl_turbo_vin_2/Page-1746004.png)
2. Install the yoke.
3. Use the J 8614-01 in order to hold the yoke.
Notice: Refer to Fastener Notice in Service Precautions..
4. Install a NEW yoke nut.
^
Tighten the nut to 330 Nm (244 ft. lbs.).
5. Install the rear propeller shaft.
6. Check the transmission fluid level. Add if necessary.
7. Lower the vehicle.