Sierra 3500 Denali 2WD V8-6.0L (2011)
7. Remove the brake hose fitting bolt (1).
Note: Do not reuse the brake hose fitting gaskets.
8. Remove and discard the brake hose fitting gaskets (2) from the brake hose (3).
9. Cap the brake hose fitting to prevent brake fluid loss and contamination.
10. Remove the brake caliper bracket bolts (1).
11. Remove the brake caliper and bracket assembly.
12. Remove the disc brake pads and springs. Refer to Front Disc Brake Pads Replacement (JD9, JF3, JF7, JG4) (See: Brake Pad/Service and
Repair/Removal and Replacement/Front Disc Brake Pads Replacement (JD9, JF3, JF7, JG4))Front Disc Brake Pads Replacement (J90, J95, J96)
(See: Brake Pad/Service and Repair/Removal and Replacement/Front Disc Brake Pads Replacement (J90, J95, J96)).
13. Inspect the brake caliper mounting and hardware for damage and wear. Refer to Front Disc Brake Mounting and Hardware Inspection (See:
Testing and Inspection/Front Disc Brake Mounting and Hardware Inspection).
Installation Procedure