Sierra 3500 Denali 2WD V8-6.0L (2011)
12. Install the catalytic converter pipe. Refer to Catalytic Converter Replacement (Gen IV Engines with Exhaust Clamp) (See: Engine, Cooling and
Exhaust/Exhaust System/Catalytic Converter/Service and Repair/Catalytic Converter Replacement (Gen IV Engines with Exhaust Clamp)
)Catalytic Converter Replacement (LGH /LML) (See: Engine, Cooling and Exhaust/Exhaust System/Catalytic Converter/Service and
Repair/Catalytic Converter Replacement (LGH /LML))Catalytic Converter Replacement (L96 with E63) (See: Engine, Cooling and
Exhaust/Exhaust System/Catalytic Converter/Service and Repair/Catalytic Converter Replacement (L96 with E63))Catalytic Converter
Replacement (L96 with ZW9) (See: Engine, Cooling and Exhaust/Exhaust System/Catalytic Converter/Service and Repair/Catalytic Converter
Replacement (L96 with ZW9))Catalytic Converter Replacement (L96 with Exhaust Flange) (See: Engine, Cooling and Exhaust/Exhaust
System/Catalytic Converter/Service and Repair/Catalytic Converter Replacement (L96 with Exhaust Flange)).
13. Fill the transmission to the proper level with DEXRON(R) VI transmission fluid. Refer to Transmission Fluid Level and Condition Check (See:
Testing and Inspection/Component Tests and General Diagnostics/4L60-E/4L65-E/4L70-E - Automatic Transmission/Transmission Fluid Level
and Condition Check).
Note: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM), powertrain
control module (PCM) or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned.
14. Reset the TAP values. Refer to Transmission Adaptive Functions (TCM) (See: Description and Operation/4L60-E/4L65-E/4L70-E - Automatic
Transmission/Transmission Adaptive Functions (TCM)).