Sierra 3500 Denali 2WD V8-6.0L (2011)
7. Remove the range selector cable end (2) from the transmission range selector lever ball stud (1).
8. Depress the tangs and remove the cable from the bracket.
9. Lower the vehicle.
10. Ensure that the steering column shift lever is still in the park position.
11. Remove the drivers seat. Refer to Front Seat Replacement - Bucket (See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Replacement - Bucket).
12. Pull back the carpet and insulation around the driver's area.
13. Remove the instrument panel knee bolster. Refer to Knee Bolster Replacement (With RPO SLT) (See: Restraint Systems/Knee Diverter/Service
and Repair/Knee Bolster Replacement (With RPO SLT))Knee Bolster Replacement (Without RPO SLT) (See: Restraint Systems/Knee
Diverter/Service and Repair/Knee Bolster Replacement (Without RPO SLT)).
14. Remove the retainer securing the cable to the steering column.
15. Remove the cable end from the steering column ball stud.
16. Depress the tangs and remove the cable from the steering column bracket.
