Sierra 3500 Denali 2WD V8-6.0L (2011)
8. Place an alignment mark between the pinion and the pinion yoke.
Note:
*
DO NOT reuse the pinion nut, replace with NEW.
*
For the 11.5 inch axle, use J-34826 socket.
9. Using the J 8614-01 - holder and remover or the J-34826 socket, remove and discard the pinion the pinion nut.
Note: Remove the pinion yoke by turning the J 8614-3 (3) clockwise.
10. Using the J 8614-2 (2), J 8614-3 (3) and the J 8614-01 - remover (1), remove the pinion yoke.