Sierra Classic 1500 2WD V8-4.8L (2007)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position Sensor Replacement
CRANKSHAFT POSITION SENSOR REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: Perform the Crankshaft Position System Variation Learn whenever the crankshaft position sensor is removed or replaced.
1. Remove the starter.
2. Disconnect the crankshaft position (CKP) sensor electrical connector.
3. Clean the area around the CKP sensor before removal in order to avoid debris from entering the engine.
4. Remove the CKP sensor bolt.
5. Remove the CKP sensor.
INSTALLATION PROCEDURE