Sierra Classic 1500 2WD V8-4.8L (2007)
5. Squeeze where indicated by the arrows on both sides of the plastic ring to disengage the quick connect fitting.
6. Pull the quick connect fitting connection apart.
INSTALLATION PROCEDURE
CAUTION: In order to reduce the risk of fire and personal injury, before connecting fuel pipe fittings, always apply a few drops of clean
engine oil to the male pipe ends.
1. This will ensure proper reconnection and prevent a possible fuel leak.
During normal operation, the O-rings located in the female connector will swell and may prevent proper reconnection if not lubricated.
Apply a few drops of clean engine oil to the male connection end.
2. Push both sides of the quick-connect fitting together in order to cause the retaining tabs to snap into place.