Sierra Classic 1500 2WD V8-4.8L (2007)
1. Install the fuel and EVAP bundle.
NOTE: Refer to Fastener Notice.
2. Install the fuel and EVAP bundle clip nuts.
Tighten the nuts to 12 N.m (106 lb in).
3. Remove the caps from the fuel and EVAP lines at the fuel tank.
4. Connect the fuel and EVAP quick connect fittings.
5. If equipped with 4WD, install the torsion bar bracket.
6. Install the EHCU (1).
7. Install the bolts (4) attaching the EHCU bracket to the frame (5).
Tighten the bolts to 25 N.m (18 lb ft).