Sierra Classic 1500 2WD V8-4.8L (2007)
Steering Damper: Service and Repair
Steering Linkage Shock Absorber Replacement
Tools Required
^
J 24319-B Universal Steering Linkage Puller
^
J 29193 Steering Linkage Installer (12 mm)
Removal Procedure
1. Raise the vehicle. Support the vehicle with safety stands. Refer to Vehicle Lifting.
2. Remove the engine protection shield, if equipped.
3. Important:
Do not reuse the nut.
Remove the steering linkage shock absorber (2) ball stud nut (1).
4. Remove the shock absorber ball stud from the relay rod using the J 24319-B.
5. Important:
Do not reuse the nut.
Remove the shock absorber mounting bolt (5) and the nut (6).