Sierra Classic 1500 2WD V8-4.8L (2007)
1. Install the transmission range selector cable bracket to the vehicle.
2. Notice:
Refer to Fastener Notice.
Install the transmission range selector cable bracket bolts (1).
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the transmission range selector cable to the bracket (2) and the lever. Refer to Automatic Transmission Range Selector Lever Cable
Replacement.
4. Lower the vehicle.
5. Check the vehicle for proper operation. If adjustment of the cable is necessary, refer to Range Selector Lever Cable Adjustment.