Sierra Classic 1500 2WD V8-4.8L (2007)
Installation Procedure
1. Install the clutch pedal sub-assembly.
2. Notice:
Refer to Fastener Notice.
Install the instrument panel carrier and the right and left bolts. The left side is shown, the right side is similar.
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the clutch pedal to brake module bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
4. Install the clutch pedal to clutch pedal bracket bolt.
Tighten the bolt to 36 Nm (27 ft. lbs.).