Sierra Classic 1500 4WD V8-6.0L (2007)
Trunk / Liftgate Handle: Service and Repair
ENDGATE HANDLE ROD RETAINER REPLACEMENT
REMOVAL PROCEDURE
1. Open the endgate.
2. Remove the fasteners (1) retaining the endgate handle bezel.
3. Remove the endgate handle bezel.
4. Release the endgate latch rod from the handle rod retainer.
5. Release the retaining clip (2) and remove the handle rod retainer from the handle.
INSTALLATION PROCEDURE
1. Install the handle rod retainer to the handle, ensuring the retaining clip (2) is fully seated.
2. Attach the endgate latch rod to the handle rod retainer.
3. Install the endgate handle bezel.