Sierra Classic 2500 4WD V8-8.1L (2007)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Remove the oil level indicator from the indicator tube.
2. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
3. Remove the ECT sensor connector from the indicator tube.
4. Remove the indicator tube bolt.
5. Remove the indicator tube bracket.
6. Remove the O-ring seal from the indicator tube.
Installation Procedure
Important: Make sure the indicator tube does not come in contact with spark plug wires. Ensure that the spark plug wires are routed around the
indicator tube.