Sierra Classic 2500 4WD V8-8.1L (2007)
25. Rotate the clutch master cylinder 45 degrees clockwise to the unlocked position.
26. Important:
Complete removal of the clutch master cylinder is not required.
Pull the clutch master cylinder out until the pushrod socket is not touching the clutch pedal.
27. Remove the clutch pedal to clutch pedal bracket bolt.
28. Remove the clutch pedal to brake module bolts.
29. Remove the I/P carrier bolts. The left side is shown, the right side is similar.
30. Allow the instrument panel carrier to move rearward enough to gain access for the clutch pedal assembly removal.
31. Remove the clutch pedal sub-assembly.