Sierra Denali V8-6.0L VIN N (2005)
1. Install the power seat adjuster switch assembly to the seat switch bezel.
2. Install the lumbar support switch to the seat switch bezel.
3. Connect the electrical connectors.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the screws retaining the power seat switch bezel.
Tighten the screws to 2 N.m (18 lb in).
Seat Switch Replacement - Power
SEAT SWITCH REPLACEMENT - POWER
REMOVAL PROCEDURE
1. Remove the power seat switch bezel from the seat.
2. Remove the power seat switch to bezel screws.
3. Remove the power seat switch.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the power seat switch to bezel screws.