Sierra Denali RWD V8-6.2L (2009)
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
1. Install the sunroof window. Refer to Sunroof Window Replacement (Extended Cab) (See: Sunroof / Moonroof Panel/Service and Repair)Sunroof
Window Replacement (Crew Cab) (See: Sunroof / Moonroof Panel/Service and Repair) .
Tighten the screws to 4 Nm (35 lb in).
2. Install the motor/actuator. Refer to Sunroof Motor/Actuator Replacement (Extended Cab) (See: Sunroof / Moonroof Motor/Service and
Repair/Sunroof Motor/Actuator Replacement (Extended Cab))Sunroof Motor/Actuator Replacement (Crew Cab) (See: Sunroof / Moonroof
Motor/Service and Repair/Sunroof Motor/Actuator Replacement (Crew Cab)) .
Tighten the motor attachment screws to 3.5 Nm (31 lb in).
3. Connect the electrical connector to the motor/actuator.
4. Remove the pin (1) from the holes that held the position while installing the drive motor.
5. Install the headliner. Refer to Headlining Trim Panel Replacement (Crew Cab) (See: Interior Moulding / Trim/Headliner/Service and Repair
)Headlining Trim Panel Replacement (Extended Cab) (See: Interior Moulding / Trim/Headliner/Service and Repair)Headlining Trim Panel
Replacement (Regular Cab) (See: Interior Moulding / Trim/Headliner/Service and Repair) .
6. Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab Existing Motor) (See:
Testing and Inspection/Programming and Relearning)Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab New Motor) (See:
Testing and Inspection/Programming and Relearning)Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab Existing Motor) (See:
Testing and Inspection/Programming and Relearning)Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab New Motor) (See: Testing
and Inspection/Programming and Relearning) .
7. Verify the operation of the sunroof.