Sierra Denali RWD V8-6.2L (2009)
Pedal Positioning Sensor: Service and Repair
Brake and Accelerator Pedal Adjuster Position Sensor Replacement (With Memory Seats)
Removal Procedure
1. Turn the ignition switch to the OFF position.
2. Remove the driver knee bolster. Refer to Knee Bolster Replacement (With RPO SLT) (See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair)Knee Bolster Replacement (Without RPO SLT) (See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair) .
3. Disconnect the adjustable pedal position sensor jumper harness electrical connector (1).
4. Remove the adjustable pedal position sensor bolts (1).
