Sierra Denali RWD V8-6.2L (2009)
2. Align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening.
3. Install the weatherstrip to the pinch-weld flange. Ensure that the weatherstrip is fully seated.
4. Install the rear door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Crew Cab) (See: Interior Moulding / Trim/Scuff
Plate/Service and Repair)Rear Side Door Sill Trim Plate Replacement (Extended Cab) (See: Interior Moulding / Trim/Scuff Plate/Service and
Repair) .